Slipping in the bathroom is one of the top accidents in the home, especially in homes with elderly and children. The main reason is caused by the accumulation of wetness, causing the bathroom floor to have algae and mold.
If the bathroom is not well-designed, it can become a dangerous zone in your home. For a new house, there is no worry because most bathrooms separate wet and dry zones.
However, some home does not place importance on bathroom design. It would be old houses having only wet areas, which is dangerous and burdensome.
It is widely used in every housing estate because project owners desire to cut construction costs. Therefore, they construct a shower curb about 5-10 cm high. Then, place the floor drain or drain in the shower zone concerning the slope of the room.
Putting an edging strip works best if the room plan has separate areas and a proper shower position. It will help prevent water around the floor from flowing out into the dry zone.
But if designing a shower zone combined with other zones, recommend attaching curtains or installing a shower enclosure. Otherwise, the water from the shower will splash throughout the room.
Another simple way, Construct the wall 80 – 100 cm wide in proportion to the bathroom. The floor level of the wet area may be about 5-10 cm lower than the dry area to prevent the water from flowing to the other side.
This method helps you spend fewer bucks. However, it may feel darker than clear glass.
The wall surface should cover with materials that are easy to clean, such as ceramic tiles. If the wall is raw concrete, coat it with a concrete sealer to protect it against humidity and dirt.
Although a bathroom is a small area, it is no less essential for healthy living quality and personal hygiene.
Anyone planning to buy a new house should pay attention to every design detail, such as construction, decorative material for interior applications, and sanitary ware.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Credit: Pinterest
